As other object, electronic components also should clean. You know if they get bogged down with dirt and dust they will overheat, causing major problems. In order to avoid this problem, know how to clean electronic parts is very important. Refer to clean electronic components, here are 7 steps for your reference.

Step 1: For the equipment you wish to clean, de-energize it, which means unplugging it, removing the battery or both. To do this is to protect you and equipment from harm.

Step 2: Disassemble the equipment you want to clean to the manufactures’ specifications to prevent damaging the equipment.

Step 3: Blow the bulk of dust and debris from the circuitry with compressed air. Keep the can of air upright, because if it is tilted it potentially can expel liquid and that could damage the circuit board.

Step 4: Dip a cotton swab in the isopropyl alcohol. Just a quick dip will do. Don’t soak it.

Step 5: Use the cotton swab to clean on the circuit board, make sure not get any cotton from the swab stuck on any of the wiringand do this until you’ve gone around the entire circuit board.

Step 6: Use a non-static cloth to wipe screens of the device. If there is a need, you can dab a little alcohol onto the cloth and keep it minimal. This will avoid short circuit.

Step 7: Before re-energizing your entire system, make sure it has dried. And this might take about 5 minites. If you used higher percentage of isopropyl alcohol, it will dry quicker.

To clean electronic components is not as difficult as I thought, come on your work as above and you will find it’s really easy.